QUARK TURBO TACTICALS
2X123 TURBO
The Quark Turbo
features a larger, deeper reflector for improved throw! These lights operate
with a significantly different UI than the regular Quarks. This UI allows the
user to program both Primary and Secondary outputs with each output capable of
any one of the 8 modes.
Overview / Main Features
Power: Two CR123A Batteries (3.0V~9.0V)
Output: Maximum - 230 lumens; Moonlight - 0.2 lumens
Runtime: Maximum - 1.8 hours; Moonlight - 30 days
Strobe: Strobe, S.O.S., and Beacon flash modes
Specifications
Powered by: 2 CR123A batteries
LED Emitter: Premium Cree XP-G R5
Voltage range: 3.0V ~ 9.0V
Dimensions
Length: 4.9 inches
Diameter: 1.2 inches
Weight: 2.8 ounces
5 Current Regulated Output Levels
3 Flash modes: Strobe, SOS, Beacon
Momentary Activation
Level Memorization
Square threads for lifetime smooth operation
Type III Hard Anodized finish
Fully knurled
Reversable/Removable Clip
Flexible & secure hand grip accessory
IPX-8 Waterproofing
Impact-resistant glass lens with Dual-coating - sapphire coating on the outside
and anti-reflective coating on the inside for optimal efficiency and durability.
T-6061 Aircraft-grade Aluminum Body
Typical Output Levels and Runtimes + (LED drive current)
Modes:
Moonlight: 0.2 lumens for 30 days, (1ma)
Low: 4 lumens for 5 days (10ma)
Medium: 22 lumens for 20 hours (50ma)
High: 85 lumens for 4.5 hours (250ma)
Max: 230 lumens for 1.8 hours (990ma)
Strobe: 230 lumens for 3 hours
Beacon: 0-230 lumens pulse for 23 hours
Only $69.99
2XAA TURBO
The Quark
Turbo features a larger, deeper reflector for improved throw! These lights
operate with a significantly different UI
than the regular Quarks. This UI allows the user to program both Primary and
Secondary outputs with each output capable of one of the 8 modes.
Power: Two AA Batteries (0.9V~4.2V total)
Output: Maximum - 206 lumens; Moonlight - 0.2 lumens
Runtime: Maximum - 1.3 hours; Moonlight - 30 days
Strobe: Strobe, S.O.S., and Beacon flash modes
Specifications
Powered by: 2 AA batteries (0.9V~4.2V total)
LED Emitter: Premium Cree XP-G R5
Voltage range:
0.9V ~ 4.2V
Dimensions
Length: 6.2 inches
Diameter: 1.18 inches
Weight: 3.0 ounces
5 Current Regulated Output Levels
3 Flash modes: Strobe, SOS, Beacon
Momentary Activation
Level Memorization
Square threads for lifetime smooth operation
Type III Hard Anodized finish
Fully knurled
Reversable/Removable Clip
Flexible & secure hand grip accessory
IPX-8 Waterproofing
Impact-resistant glass lens with Dual-coating - sapphire coating on the outside
and anti-reflective coating on the inside for optimal efficiency and durability.
T-6061 Aircraft-grade Aluminum Body
Typical Output Levels and Runtimes + (LED drive current)
Modes: Moonlight: 0.2 lumens for 30
days (1ma)
Low: 4 lumens for 5 days (10ma)
Medium: 22 lumens for 24 hours (50ma)
High: 85 lumens for 5 hours (250ma)
Max: 206 lumens for 1.3 hours (700ma)
Strobe: 206 lumens for 2.5 hours
Beacon: 0-206 lumens pulse for 18 hours
Only $69.99
Operation
Operating your Quark Turbo Tactical is simple>Insert the battery with the positive
side (+) towards the head. Make sure the head and tailcap are tightened, then
depress the tailcap button fully so that it "clicks" and the light turns on. You
can also press the tailcap lightly (you don't have to "click" it on) to activate
the light momentarily. This is known as the momentary-on feature.
The Quark Turbo Tactical can memorize any two modes of output, from its eight total
modes, to be instantly available. These two memorized modes are accessed by
either tightening or loosening the head (for example, tight can be Max, and
loose can be Low).
Programming Modes:
To have your Quark Turbo Tactical memorize a different mode, turn it on and loosen the
head by a half-turn. Then, tighten the head at least four times rapidly
(twisting it tight, then loose, then tight, etc., four times). After the fourth
time, leave the head tight or loose depending which position you want to
program.
After three seconds, the light will flash, signaling it is ready to be
programmed. Cycle through the eight available modes by clicking the tailcap off
and on. The mode sequence is as follows:
Moonlight » Low » Medium » High » Max » SOS » Strobe » Beacon
Once you find your desired mode, leave that mode on for ten seconds and the
light will flash again, confirming that the mode has been memorized. To cancel
programming before it flashes, turn the light off for three seconds.
Home Money Clips Guitar Picks Pendants Tweezers Firesteel
Fire Fork Sporks Can Opener Bust a Cap Limited Ti